Connectivity
To Set Data Module Extensions
To Set Data Module
Extensions
When to use If you have a DEFINITY G3r, set the data module extensions on the PBX after you have assigned a system port to an extension.
If you have a DEFINITY G3i with a netcon channel, you can skip this procedure.
Procedure Use the following steps to set data module extensions.
Step | Action |
|
|
1 | At the command prompt on the switch, execute the |
| following command: |
| add |
| xxxxx = the telephone number that you want to assign |
| to the data module that is |
| This data module accepts calls coming into the |
| switch. |
| Result: The Data Module screen displays. |
|
|
2 | Complete the Data Module screen. |
| Hint: We suggest that you use the screen’s defaults. |
|
|
3 | Do you want to establish a hotline connection to the |
| PBX? |
| ■ If yes, go to step 4. |
| ■ If no, go to step 6. |
|
|
