
Serial I/O Cards
Equinox SST
Equinox SST
When to use Use this section to install the Equinox SST device driver.
Materials ■ Root permission
needed
■ The Equinox SST installation diskette ■ The Equinox SST installation guide
Installation Before your begin the installation, make sure your hardware is:
guidelines
■ UnixWare 2.01 compatible
■ Installed, with all connections securely in place
Procedure Start at the UNIX prompt.
Step Action
1Log into the Proxy Agent as root.
2Insert the installation diskette.
3Enter the following command: pkgadd
4Answer the screen prompts until the installation is complete. (We recommend that you use the system defaults.)
Hint: If you need help, refer to your Equinox installation guide.
Issue 2 April 1996