AT&T G3 manual To Program PBX Ports, Use this Command To do this

Connectivity

To Program PBX Ports

To Program PBX Ports

When to use Program the ports for the DEFINITY G3r and G3i PBXs after you have established the port terminations.

Guidelines Use the following guidelines when you program ports:

■On DEFINITY G3r, the system port requires a data board and pdata board.

■On DEFINITY G3i, use the following commands:

Use this
command ...	To do this ...
add data-module	Assign the type netcon to an
	extension
add hunt-group	Add the netcon extension as a
	member of a hunt group

Procedural Use the following procedures to program DEFINITY G3i and G3r

overview PBXs for compatibility with the Proxy Agent:

■Procedure 1: System ports

■Procedure 2: Analog line with modem

■Procedure 3: Voice and data

■Procedure 4: Data-only data module and ADU

Issue 2 April 1996 6-11