Planning Connectivity
To Validate Dial Strings
To Validate Dial Strings
Introduction You must verify that the dial string in the /etc/uucp/Dialers file is valid for your data communications hardware. If it is not, you need to edit the Dialers file.
When to use Validate the dial string after you have connected your data communications hardware to your Proxy Agent PC.
Dial strings The following table shows the valid dial string for your communications hardware. The dial string in the Dialers file is on one continuous line.
Communications |
| |
hardware | Dial string | |
|
| |
Modem | hayes | |
| \M\dAT&FE1V1X4Q0&C1&D2S7=255S0= | |
Data Module: | ||
0\r\c OK \EATDT\T\r\c CONNECT \m | ||
AT&T 7400B | ||
| ||
| Use this dial string if you have a Serial I/O | |
| ports card. | |
|
| |
Data Module | pdm =+ "" \M\K\p DIAL: \T | |
(PDM or MPDM) | ANSWERED \p\c\m | |
or ADU |
| |
|
|
Issue 2 April 1996
