
Serial I/O Cards
To Verify Dial Strings
Dial strings The following dial string is associated with data modules: for data
modules PDM =+ "" \M\K\p DIAL: \T ANSWERED \p\c\m
If you are using a 7400B data module, use the dial string for modems on the previous page.
Procedure Use the following steps to verify that the dial string entry is appropriate for the type of communication device.
Step Action
1Open the /etc/uucp/Dialers file.
2Does the Dialers file contain a dial string entry (with the correct string) for your communications device?
■If yes, go to step 3.
■If no, use a UNIX editor and modify the file to add or change dialer entries for the type of communication devices you added.
3Write and close the file.
End
Issue 2 April 1996