Planning Connectivity
To Set the Dip Switch
To Set the Dip Switch
Introduction You must verify that the dip switch is set correctly. If it is not, you need to change the settings.
When to use Set the dip switch after you have edited the Dialers file.
Settings for The following table explains the settings for a 7400B data module. the 7400B
data module
If the data |
|
module is a … | Then do this… |
|
|
Stand alone, | ■ Turn dip switch SW1 on. |
7400B data module | ■ Leave all other dip swltches off. |
| |
|
|
Leave all dip switches off. | |
7400B data module |
|
|
|
