Serial I/O Cards
To Create Port Monitor Entries
To Create Port Monitor
Entries
Introduction The port monitor entry must contain the correct information to support the way the port will be used.
When to use Complete these procedures after you have installed the Serial I/O card and verified that the Devices and Dialers files are set correctly.
Procedural The following procedures explain how to administer the port that
overview receives alarms. Complete these procedures in the sequence shown.
■Procedure 1: Open the Port Monitor screen
■Procedure 2: Enter port data
■Procedure 3: Open the Port Services screen
■Procedure 4: Enter port services data, page 1
■Procedure 5: Enter port services data, page 2
Procedure 1: Start at the UNIX prompt.
