AT&T G3 manual Minimum Processor Hardware Requirements

Models: G3

1 287
Download 287 pages 31.55 Kb
Page 251
Image 251

Issue 2 January 1996 B-13

PROXY AGENT SOFTWARE PECs

1336-PA1

Proxy Agent (1.1) Software for customer provided PC

 

[CTR15-USA, CTR21-International]

1336-3F2

Fault Management Software, HP OpenView for HP-UX

1336-3F3

Fault Management Software, HP OpenView for Sun OS

1336-3F5

Fault Management Software, Cabletron Spectrum 3.1 on SunSparc/Sun OS

13360

RTU per DEFINITY G3 PBX

MINIMUM PROCESSOR HARDWARE REQUIREMENTS

486DX266 Processor (Intel 486 or later, 66Mhz [DX2-66] or greater Clock Speed ), UnixWare 2.01 certified

At least 16 MB RAM

256K Cache Add On

3.5 inch (1.44MB) floppy disk drive

101-key keyboard

At least 3 ISA BUS expansion slots

At least a 500MB Hard Disk Drive (300 Mbytes used for Operating System and Proxy Agent)

1 parallel interface (female 25-pin)

2 serial interface (Note: Landmark Kickstart Remote Maintenance Board uses one serial interface)

CD-ROM Drive 2X or greater, with SCSI interface and card

VGA Color Monitor

UnixWare 2.01 compatible Ethernet LAN card (10 Mbit NIC), i.e. Intel EtherExpress 16

Serial I/O Port Boards (see below)

Customer-Provided Multiplexor

Design Configuration

Data Networks

 

Page 251
Image 251
AT&T G3 manual Minimum Processor Hardware Requirements