LogCommands 7-29
Octel 200/300 S.4.1PB60019−01
Displaying Call Detail Records
Use the CDR command to display the CDR log file and to specify which parameters to show. The
following are the parameter options:
-By time: start and/or end time
-Page length, line length
-Specific number of records to be listed
-Actions that occur after a transaction event has been selected, even if those actions were not
themselves selected (subsequent actions)
-Types of information specified by filters
-Beginning of the log file set and whether the log file has wrapped around and overwritten itself
displayed
To display CDR command parameter options and all the report filter types, at the @ prompt, enter:
CDR ? Enter
@CDR ?
USAGE:
CDR [S <TIME>] [E <TIME>] [B <TIME>] [R <MAX>] [L <LEN>] [P <LEN>][W] [SU]
FILTERS:XA <XACTIN>, ST <STAT>,PR <PRT>, CO <COS>, MA <MBX>, MS <MS>, ME <ME>
<TIME> : <YEAR> <MONTH> <DAY> <HOUR> <MINUTE>
Refer to the following section, Setting Display Specifications, for an explanation of each field.
The following rules govern use of the CDR command to control what is displayed:
-Youcan enter display specifications and filter types in any order.
-Youcan omit display specifications and filter types; some can be partially specified so that a range
or record that matches the entered characters is displayed.
-If more than one filter (XA,ST,PR,CO,MA,MS,ME)is entered, a match on any one field allows the
record to be displayed.
@CDR S 00 3 26 00E0032618 00 R 25 XA LOG ST OK SU
Start
Time
3/26/00
00:00
End Time
3/26/00
18:00 Type
(XA)
Log Status
OK
Maximum
Records =
25
List
subsequent
actions