7-32 Installationand Maintenance Volume
Octel 200/300 S.4.1 PB60019−01
@CDR W
LOG FILE WRAPPED
LOG FILE BEGINNING TIME IS 01/01/00 12:01:00
TIME OF FIRST RECORD IN LOG IS 01/01/00 08:25:03
@CDRE0001150600
MM/DD/YY HH:MM:SS XACTIN STAT MS ME PRT DURATN MAILBOX COS CALLER
01/01/00 10:42:07 TIMEST OK
.
.
.
01/14/00 20:59:51CALINT DIRI OO 034 0:00:0
@CDRB0001150600
BEGIN TIME SET FOR LOG
Toreset logical begin
time
Tosee the current
logicalbegin time
Toprint records from
thecurrent logical
begintime to 6:00 a.m.,
January15, 2000
Specifying the Display
These are the settings for how the CDR log isdisplayed:
-Line Length, L [LEN]
The default column format is 80 columns, but any line length up to 132 columns can be displayed.
Twocolumns, DESTINATION and RTE, cannot be seen if the column format is set to 80. To see
those columns, you must specify the line length to be132.
-Page Length, P [LEN]
The default number of lines per page is 66. If you don’t want header information after every 66 lines,
change this parameter. If 0is entered, the page displays one header at the beginning of the CDR file.
-Number of Records, R [MAX]
Use this command to specify the maximum number of records to list during this command
transaction. If no maximum is specified, all records that meet the criteria are displayed.
-Subsequent Action, SU
Print the subsequent actions for records that pass the filter criteria. An asterisk (*) prints in the first
column for each transaction that is not the initial transaction of the call. To see subsequent actions
completed for a record, enter SU in the command line.
@CDR XA LOGON ST BADP SU
MM/DD/YY HH:MM:SS XACTIN STAT MS ME PRT DURATN MAILBOX
*08/09/00 10:19:38 LOGON BADP 00 00 055 0:00.2 4430
*08/09/00 10:19:38 LOGON BADM 00 00 055 0:00.0 6