8-24 Installationand Maintenance Volume
Octel 200/300 S.4.1 PB60019−01
Table 8-2 Hardware Error Types and Remedies (continued)
Error Type:Name PriorityRemedySource
41.Visual Mailbox
Hardware Error
Command link
interface LAN is
malfunctioning or has
detected a network
error
This is a VisualMailbox error. First check
that Visual Mailbox isfunctioning properly.
If it is, this is a false alarm or the condition
has corrected itself.
Check to see if the cable from the
Octel 200/300 to the Gateway is properly
connected and secured. Restart the
Gateway. If the problem still exists, replace
the CLI board in the Gateway.
3
DATA-1 = LAN ERROR TYPE AS FOLLOWS:
01 = NO RESPONSE FROMLAN CONTROLLER AFTER CONTROLLER RESET
02 = NO INTERRUPT RECEIVED FROM LAN AFTER CONTROLLER ENABLED
03 = INCORRECT ID STRING STORED BY CONTROLLER AFTER RESET
DATA-2= FIRST BYTE OF ID STRING (SHOULD BE D1 HEX)
DATA-3= SECOND BYTE OF ID STRING (SHOULD BE NODE ID)
20 = PACKET TRANSMISSION WASNOT ACKNOWLEDGED AFTER 5
SECONDS
DATA-2= DESTINATION NODE ID
21 = NETWORK RECONFIGURATION OCCURRED DUE TO TOKEN RING
INACTIVITY
2