8-30 Installationand Maintenance Volume
Octel 200/300 S.4.1 PB60019−01
Table 8-2 Hardware Error Types and Remedies (continued)
Error Type:Name PriorityRemedySource
46.Received DTMF
other than D
(AMIS)
While trying to
establish a connection
with a Protocol 4
(AMIS) location,
received non D
DTMF tone,
suggesting that a
person’s telephone
number may have
been entered.
Check the route. Check that the PNN or
TNN is correct. Contact the system
administrator of the remote network.
1
DATA-1 = ERROR CODE:
01 = WHILE TRYING TO ESTABLISH A CONNECTION WITH A LOCN,
WE GOT BACK DTMF WE WERE NOT EXPECTING, SUGGESTING
WE MAYHAVE, SOMEHOW, DIALED A PERSON’S TELEPHONE
NUMBER.
FOR PROTOCOL 1,2 AND 3 WE COULD’VE GOT DTMF 0-9, * OR #
FOR PROTOCOL 4 WE COULD’VE GOT ANY DTMF OTHER THAN
D
DATA-2and DATA-3= ARE THE INDEX INTO THE NETRLT TABLE
THATLEADS US TO THE PROBLEMATIC LOCATION
REMEDY: Check the route, PNN and TNN. Contact the system
administrator at the remote end.
DATA-2 = ERROR CODE:
02 = ATTEMPTING TO NETWORK WITH AN OEM MODEL THAT HAS
NETWORKING INCOMPATIBILITY
DATA-2and DATA-3= ARE THE INDEX INTO THE NETRLT TABLE
THATLEADS US TO THE PROBLEMATIC LOCATION
REMEDY: Contact your technical support center.
61.VCU: Insufficient
Control RAM
The VCU does not
have enough control
RAM for model
specified by CPU.
Contact your technical support center. 3
DATA-1 = MEGABYTES OF RAM ACTUALLY HAVE
DATA-2 = MAX PORTS GIVEN BY CPU REQUEST
62.VCU: Insufficient
VoiceRAM
The VCU does not
have enough voice
RAM for model
specified by CPU.
Contact your technical support center. 3
DATA-1 = MEGABYTES OF RAM ACTUALLY HAVE
DATA-2 = MAX PORTS GIVEN BY CPU REQUEST