Avaya Octel 200, Octel 300 .

Maintenance Commands 6-53

Octel 200/300 S.4.1PB60019−01

MAXIMUM TONE OFF PERIOD FOR ANY TONE

This delay must be set to avalue equal to the largest value for any of the following delays in

the Application Delay Table: 55, 65, 67, 71, or 75.

Use — When the message server looks for a ringback, busy, or fast-busy tone, it uses this

delay to determine whether the TONE OFF is a valid silence period. If the TONE OFF is

greater than this delay, the message server assumes an answer condition has occurred.

.Application delay 123 must be set to 0 for the server to wait the time specified in

application 51. See application delay123.

MINIMUM TONE OFF PERIOD FOR ANY TONE

This delay must be set to a value less than the value for any of the following delays in the

Application Delay Table: 56, 66, 68, 72, or 76.

Use — When the message server looks for a ringback, busy, or fast-busy tone, it uses this

delay to determine whether the TONE OFF is a valid silence period. If the TONE OFF is less

than this delay, the message server assumes that an answer condition has occurred.

RINGBACK MAXIMUM TONE ON PERIOD

The longest delay that a TONE ON can be to qualify as a ringback.

Use — The message server uses this delay to determine whether the tone cadences that it is

monitoring is a ringback. If the TONE ON islonger than this delay, the message server

assumes that it is not a ringback.

RINGBACK MINIMUM TONE ON PERIOD

The shortest delay that a TONE ON can be to qualify as a ringback.

Use — The message server uses this delay to determine whether the tone cadences that it is

monitoring is a ringback. If the TONE ON isshorter than this delay, the message server

assumes that it is not a ringback.

RINGBACK MAXIMUM TONE OFF PERIOD

The longest delay that a TONE OFF can be to qualify as a ringback.

Use — The message server uses this delay to determine whether the tone cadences that it is

monitoring is a ringback. If the TONE OFFis longer than this delay, the message server

assumes that it is not a ringback.

RINGBACK MINIMUM TONE OFF PERIOD

The shortest delay that a TONE OFF can be to qualify as a ringback.

Use — The message server uses this delay to determine whether the tone cadences that it is

monitoring is a ringback. If the TONE OFFis shorter than this delay, the message server

assumes that it is not a ringback.

TIME TO WAIT FOR FIRST TONE

This delay should only be modified when using CPT-DTMF integration and must be set to 0

or a value greater than application delay 51.

Use — If set to 0, the server waits for the amount of time specified by application delay 51

for the first TONE ON. If application delay 123 is non-zero, after dialing out digits for an

outcall, the server waits this amount of time for the FIRST TONE ON condition. If no TONE

ON occurs in the specified time, the server assumes the call was answered.

123