Installation 4−37
PB60019−01 Octel 200/300 S.4.1
5. Leave a test message for telephone C.
.A message is not delivered to a mailbox unless it is at least 4.5 seconds long. The mailbox
must be entered in the USER Table for the Octel 200/300 to offer to take a message.
6. The Octel 200/300 should now initiate a message-waiting-notification call (ASAP message waiting)
to the extension associated with telephone C.
.If all ports are allowed to make outcalls, the call is not attempted when three-fourths or more
of the ports are being used. Also, for message waiting, INFORMATION TableIndex 12 —
MESSAGE WAITINGNOTIFICATION, must be set to Y.
7. Does the Octel 200/300 call the extension associated with telephone C?
YES 'Continue.
NO 'Determine the cause and correct the problem before continuing.
8. Answer telephone C. The Octel 200/300 should respond with “Extension XXX has X messages.
Ready,” or “Extension XXX has X messages. Please enter your security code.”
9. Enter the security code, if asked, and press 5to Listen to the test message.
10. Does the message sound clear?
YES 'Continue.
NO 'Determine the cause and correct the problem before continuing.
11. Press 3to Erase the message, then press 9to exit the mailbox. Does the Octel 200/300 respond
with “X messages will be erased” ?
YES 'Press 9to exit the message server. The Octel 200/300 should respond with “good-
bye.”
NO 'Determine the cause and correct the problem.