Avaya Octel 200, Octel 300 Error detected in the configuration tables, Note 1:

System Errors and Traffic Pegs 8-25
Octel 200/300 S.4.1PB60019−01
Table 8-2 Hardware Error Types and Remedies (continued)
Error Type:Name PriorityRemedySource
42.Configuration
Error
Error detected in the
configuration tables
Check the configuration tables. 1
The DATA-1field specifies the type of error. DATA-2through DATA-4are data
associated with the error.
DATA-1 = ERROR CODE:
01 = NO DEFAULTLINK ASSIGNED FOR NON-SPECIFIED COS
DATA-2 = COS
DATA-3 = HIGH BYTE OF USER NUMBER
DATA-4 = LOW BYTE OF USER NUMBER
02 = MORE THAN ONE DEFAULT LINK DEFINED
DATA-2 = DEFAULT LINK ASSIGNED (SEE NOTE 1)
DATA-3 = THIS DEFAULT LINK (SEE NOTE 1)
03 = PORT ASSIGNED TO MORE THAN ONE INTEG TASK
DATA-2 = SYSTEM PORT NUMBER
DATA-3 = FIRST IU TASK ASSIGNED (1...)
DATA-4 = THIS IU TASK ASSIGNED (1...)
04 = AP NOT CONFIGURED IN SLOT TABLEBUT SYSP 146 IS SET
05 = LINK ASSIGNED FOR MWI WAS NOT ENABLED
DATA-2 = LINK AND UNIT (SEE NOTE 1)
DATA-3 = HI BYTE OF USER NUMBER
DATA-4 = LO BYTE OF USER NUMBER
06 = GATEWAYERROR MBOX NOT CONFIGURED (SYSP 199)
07 = CALL TO MBOX WITH COS ATTRIBUTE 84 THAT WASNOT
CORRECTLYCONFIGURED
DATA-2 = SPECIFIC OUTFAX (Attribute 84) ERROR
= 0= MBOX HAS ZERO MESSAGES
= 1= FIRST MSG IN MBOX IS NOT A FAX
= 2= RUSDIR FAILED(Read User Director Failed)
08 = PRIMARY-SECONDARYCIRCULAR LINK LIST CORRUPTED
DATA-2 = 0 SANITY CHECK FAILED
1 LOOP DETECTED IN THE LIST
09 = BAD SDM MBOX
DATA-2 = 0
DATA-3 = SUBTYPE
DATA-4 = 8 MAILBOX DIGITS*
*Read the lastpair of digits first,the next-to-last second, etc. For example, if the mailbox were
12345678, the data 4 field would read 78563412. The Character “A” representsa 0 and the character
“0” represents a null character. For example, mailbox 52025 would appear as 0050A250.
0A = BAD NETWORK LOCATION
0B = BAD PHANTOM MBOX
DATA-3 = USER# HIGH BYTE, DATA-4= USER# LOW BYTE.
0C = BAD AUTOCOPY TARGET CONFIGURED
DATA-2,DATA-3= HI/LO USER # WHOSE AUTOCOPY TARGET IS
INVALID
Note 1: HI NIB = LINK (0...); LO NIB = IU (1...)
0D = BAD FAX TARGETCONFIGURED
DATA-2 = HIGH USER NUMBER WHOSE AUTOCOPY TARGET
IS INVALID
DATA-3 = LOW USER NUMBER WHOSE AUTOCOPY TARGET
IS INVALID