In-22 Installationand Maintenance Manual Master Index
Octel 200/300 S.4.1 PB60019-01
ROLM Model 30/80. See ROLM 9751
ROLM Model 30/80 CBX requirements, 8.2-4
ROLM Model 30/80 configuration, 8.2-6
Round trip time for message waiting
clearing, 6-4
listing, 6-3
ROUTE Table, 1-14, 10−1–10−8
collocated analog networking, 7−6–7−9,10−6–10−8
digits dialed, 10−6
drop, 10−6
how it is used, 10−6
how to configure, 10−6
route name, 10−6
using INSTALL, 10−7
using UPDATE,10−7
overview, 10−1
remote analog networking, 2−28–2−30,3−9–3−10,
4−8–4−9,6–7, 6−8–6−9,10−2–10−5
D character, 3−9, 4−8
DDD, 10−3
digits dialed, 10−3
drop, 10−2
E character, 2−28, 3−9, 4−8, 6, 6−8
how it is used, 10−2
how to configure, 10−2
N character, 2−29, 3−9, 4−8, 6, 6−8
P character, 2−29, 3−9, 4−8, 6, 6−8
route name, 10−2
SPRINT,2−28, 3−9, 4−8, 6, 6−8, 10−3
T character, 2−29, 3−9, 4−8, 6, 6−8
using INSTALL, 10−3
using UPDATE,10−3
WATS, 2−28, 3−9, 4−8, 6, 6−8, 10−3
ROUTE Table form
Collocated analog networking, 7−6
collocated analog networking
can drop, 7−9
D character, 7−7
digits dialed, 7−9
E character, 7−7
N character, 7−7
P character, 7−7
route name, 7−9
sample, 7−8
T character, 7−7
sample, remote analog networking, 2−30, 3−10,
4−9, 7, 6−9
RS-232C, 4−13, 4−14, 4−24
cable length, 4−14
Centrex, 6-13
integration error, 8-11
RS-232C , 2-2
connector, 2-28
S
SATlog. See Server Activity Trace log
SCHEDULE Table, 1-16
SDBG command, 6-18
Secondary location, LOCATION Table,remote
analog networking, 11−16
Serenade Domain DigitalNetworking. See Domain
Digital Networking
serial I/O ports, 2-10
Serial Integration Card, Meridian 1, 2-9
Serial number, INSTALLprogram, 1-8
Serial ports
first, 2-10
fourth, 2-10
second, 2-10
third, 2-10
Server Activity Trace log, 7-50
Shutdown, 6-7
shutdown command, 6-7
SIC8. See Meridian 1 Adaptive Integration;Serial
Integration Card
Simple Network Management Protocol, 11-4,
11B-1–11B-12,8−39
See also SNMP
Single Digit Menus, INSTALLprogram, 1-19
Site requirements, 4−4
SL-1 Adaptive Integration, 6-1–6-41
Called Party Identification, 6-2
direct calls from external trunks, 6-2
direct internal call, 6-3
forwarded external calls (RNA or busy), 6-2
forwarded internal calls, 6-3
hardware requirements, 6-4
installation checklist, 6-35–6-41
maintenance commands, 6-32
Message Waiting Indication, 6-1
Overture 200/300 configuration, 6-13–6-15
Called Party Identification, 6-13
Message Waiting Indication, 6-13
SL-1 configuration
customer datablock, 6-6
customer telephones, 6-11
incoming trunks, 6-6
Overture 200/300 port extensions, 6-7
SLIC link digit display telephone extensions, 6-8
terminal hunt group, 6-4
SL-1 digit display set keyboard layout, 6-8
SLIC board installation, 6-30
software requirements, 6-5
testing, 6-16
testing procedure, 6-17–6-35