Avaya Octel 200, Octel 300 Message Activity, Integration Activity

LogCommands 7-15
Octel 200/300 S.4.1PB60019−01
Message Activity
To print message activity currently in the CPT log using the LOG command, at the @ prompt enter:
LOG PR CPT Enter
To listall messages or specify a specific message number, enter the filter MS. In this example, this
command displays all records for message 3000, from the beginning of the log to the end.
@LOG PR CPT
Specify Print Option(s):
“S”tart <time>, “E”nd <time>, “L”ine <length>, “p”age <length> “\”
”C”ontinuous
Filters: PR TY EV AU MB MS SL UN LI SO D1D2 D3 D4 D5
>MS 3000
Integration Activity
To display integration activity using LOG, specify the type of integration to trace. Enter the filter TY x,
where xis the type of integration to trace. Enter TY INTGto show all integration activity.
-INTG_C. Card-based integration record (MIC, RIC, ATTIC,SL1, M1)
-INTG_CA. Card-based ANI integration record (MIC, RIC, ATTIC,SL1, M1)
-INTG_R. RS-232C integration record
-INTG_D. DTMF integration record
In addition to TY,you can also specify the following filters for integration:
-SL Slot number for card integration
-UN Unit number for card integration
-LI Link number for card integration
-SO Source of call (integration)
To display APlink activity using LOG, at the @ prompt enter:
LOG PR CPT Enter
@LOG PR CPT
Specify Print Option(s):
“S”tart <time>, “E”nd <time>, “L”ine <length>, “p”age <length> “\”
”C”ontinuous
Filters: PR TY EV AU MB MS SL UN LI SO D1D2 D3 D4 D5
>TYAPS007911 25
In this example, this command displays all Works for Serenade activity in the CPT log that occurred on
or after 11:25 a.m., July 9, 2000.