Avaya Octel 200, Octel 300 The ST TR command shows the status of the trunk. This example shows normal trunk status.

DTIC 10-15
Octel 200/300 S.4.1PB60019−01
The ST TR command shows the status of the trunk. This example shows normal trunk status.
dtic>ST TR
−−−−− DS1A Signal Status −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−
RECEIVE TRANSMIT
State: In Frame Traffic: Enabled
RAI: OFF RAI: OFF
AIS: OFF AIS: OFF
Line Code: HDB3 Mode: Non−CRC4
Loopback: OFF
Excess CRC Failures: NO
Excess FAS Errors: NO
Excess FEBE: NO
−−−−− Timeslot 16 Signaling Channel Status −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−
RECEIVE TRANSMIT
State: In CAS Frame Mode: CAS
MF RAI: OFF MF RAI: OFF
AIS: OFF AIS: OFF
−−−−− CM State −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−
State: On−line
The ST CARD command shows the status of the card. This example shows normal card status. In this
example, the card is enabled to be the synchronization receiver of the master clock.
dtic>ST CARD
−−−−− Channel Status −ALL −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−
CARD STATE: UP
SEQUENCER PC: C2
CLOCK MASTER: Enabled
CLOCK ACTIVE: Enabled
The ST 1 command shows the port status for port 1 (channel 1). This example shows normal port status
for port 1. The port is idle and is transmitting and receiving the on-hook code.
dtic>ST 1
−−−−− Channel 01Status −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−
RECEIVE TRANSMIT
ABCD: 0001ABCD: 0001
OTHER:
CHANNEL STATE: ON HOOK
SEQUENCER PC: 02