Procedures 12-55
Octel 200/300 S.4.1
PB6001901
@DISKO
CURRENT STATUS
Slot Type ID Status Configured
−−−−−−−−−−−−−−−−−−−−−−−−−−−−
B3 System1S1ACTIVE Configured
B4 System2 S2 ACTIVE Configured
C1Voice 1−ACTIVE Not Configured
DISK OPTIONS
1. ADD DISK
2. REMOVE DISK
3. REPLACE A DISK
4. RESTORE SYSTEM
5. UPGRADE LANGUAGES
6. UPGRADE SYSTEM
Select option to be performed
(1−5Empty line = EXIT)
:2
Drive in slot C1has been removed.
To reload the system.
Refer to the Installation chapter, Octel 200/300 Testing section, in this
volume.
Reload the System
14. Make sure the configuration
backup disk is write-enabled.
15. Insert the configuration backup
disk into the FD.
16. Press the lower button on the
CPU.
17. Log on to the system using the
maintenance password.
18. Verify correct system operation.