Procedures 12-69
Octel 200/300 S.4.1
PB60019−01
INSTALL COMPLETE.
WAIT...
DONE.
SAVE configuration to a diskette? (Y/N, empty line = N).
:
If you are reloading from disk, the information does not need to be
resaved, press Enter . When complete, the system header and the
following message are printed:
DAY MM/DD HH:MM:SS YYYY (SYSTEM NAME) ID:000 S/N:000000
PBX:00
−−−−−−SYSTEM INSTALLATION COMPLETED −−−−−−−−
To reload the system. Monitor the bootprocess until the SYSTEM
INITIALIZATIONSUSPENDED! prompt appears. Press Enter untilyou
reach the password prompt.
Place test calls to all ports and check for normal operation. Refer to the
Installation chapter, Octel 200/300 Testing section, in this volume.
Reload the System
38. Press the lower button on the
CPU.
39. Log on to the Octel 200/300
using the maintenance
password.
40. Restore, if backup is available,
or record greetings, names and
prompts.
41. Verify correct system operation.