Quick Reference Guide
Octel 200/300
Maintenance Commands
Octel 200/300 S.4.1PB60019−01
Command
Type
InformationCommandSubject
Miscellaneous
Commands
(continued)
Port Status PS x Displays current state of the ports.
x = non-zero for continuous (optional)
Restart RESTA Restarts CPU. All active ports and the modem are
dropped. The maintenance level password must be
entered before restart begins.
Restart RESTA 2 Restarts CPU. Reloads software from the hard disk.
All active ports and modem are dropped.
Integrations Integration trace information is logged to the
message server’s call-processing trace log file.
APIC or NPIC SDBUG xx 1FF
yy
xx is the slot number and yy is either 7F to turn on
debug or 00 to turn off.
All other integrations SDBG xx yy zz xx is the slot number, yy is the unit number, 11 is
the link number, and zz is either 7F to turn on
debug or 00 to turn off.
Network Time TIME Displays the current system date and time. Used
only at the @ prompt.
Integration Cards UPINTG Restarts integration cards and disrupts call
processing for approximately one to two minutes.
VCU VCU Connects to the VCU software and provides
detailed drive status, drive configuration, message
header information on installed hardware. From
this command you can enter the L DMAP
command to get more details.
Write Protect Drive WPDISK Write protects a disk drive to prevent any new
messages from being created on that drive.