Avaya Octel 200, Octel 300 - page 57

INSTALL 1-29
Octel 200/300 S.4.1PB60019−01
Enter INSTA at the @ prompt. If you enter Yto reinstall, you are prompted to enter a password.
Enter the maintenance level password. If you do not enter a password or you enter an incorrect
password, the INSTALL program is aborted.
@INSTA
−−−−−−− SYSTEM INSTALLATION DIALOG −−−−−−−
DAY MM/DD HH:MM:SS YYYY SYSTEM NAME ID:000 S/N:000000 PBX:00
SYSTEM HAS ALREADY BEEN INSTALLED.
Do you wish to RE−INSTALL? (Y/N, empty line = N)
<<IF YES, ALL TABLES WILL BE CLEARED AND USER MESSAGES WILL BE LOST>>
:Y
PASSWORD:
CLEARING ALL TABLES...DONE.
INITIALIZING ALL USER DIRECTORIES...DONE.
All the information entered earlier during the INSTALL is cleared. The message server prompts you
to preload any CONFIGURATIONtables from the backup configuration diskette.
Do you wish to PRE-LOAD any tables from a previous INSTALL
from your DISKETTE? (Y/N, empty line = N)
:
If you answer N, none of the database tables are loaded. The reinstallation begins with the first
INSTALLquestion. Refer to the Answering Questions in INSTALL section.
If tables should be preloaded, enter Yand insert the configuration backup disk. The message server
asks if all tables should be preloaded.
Insert desired DISKETTE in drive. Press RETURN when ready...
PRE−LOAD ALL configuration tables?
:Y
If you answer Y,the Octel 200/300 preloads all of the system configuration tables. If you answer N,
the Octel 200/300 responds with the following:
PRE−LOAD USERS, DISTRIBUTION LIST, COS, SCHEDULE, INFORMATION,
HOLIDAY, DST, and NAMES tables? (Y/N, empty line = N)
If you answer Y,these tables are preloaded. If you answer N, no tables are preloaded.