Maintenance Commands 6-17
Octel 200/300 S.4.1PB60019−01
Command Basic Definition
PRT x PRINT TONE
Monitors and prints DTMF tones entered by the caller, the DTMF tones sent by
the Octel 200/300 port, and the call-progress tones from the PBX to the terminal.
This is a real-time command, and it can be initiated on only one port at a time.
The information is not stored.
In this command, xis the port to monitor. Toexit the monitor mode, press
.
Escape
The following are the types of messages that can display with the PRT command:
ANSWER
The Octel 200/300 detected that the called party answered the telephone.
NO ANSWER
The Octel 200/300 determined that the called party did not answer within the
specified time period.
SLOW BUSY
Reorder tone from the PBX or central office was detected.
FAST BUSY
Reorder tone from the PBX or central office was detected.
VACANT EXT.
Solid dial tone from the PBX or central office was detected.
FLASH
The Octel 200/300 performed a hook switch.
NO DIAL TONE
The Octel 200/300 did not receive a PBX or central office dial tone.
EXPECT DIAL TONE
The Octel 200/300 is configured to expect a PBX or central office dial tone.
IN—x
xis the incoming digit entered by the caller.
DIAL—x
xis the digits being sent by the Octel 200/300.
TON
The Octel 200/300 is reporting that a tone was received from the PBX or central
office. The number displayed is the actual time duration of the tone received.
T OFF
The Octel 200/300 is reporting that no tone (silence) was received from the PBX
or central office. The number displayed is the actual time duration that no tone
was present.
PRTMAP LIST PORT MAPPING
Lists allocation of message server port numbers to ports configured in each slot,
and displays the allocation of each port to integration unit.
PS x PORT STATUS
Prints status of all ports, where xis non-zero for continuous (optional) printing.