7A-10 Installationand Maintenance Volume
Octel 200/300 S.4.1 PB60019−01
Table 7A-2 EVENT and AUX Activities in Call Process Trace Log (continued)
TYPE
Column
Entry
DESCRIPTION
AUX
Column
Entry
DESCRIPTION
EVENT
Column
Entry
RBLD_P Logged an inconsistency during pass 3 of
the rebuild for the Names Directory.
.The first 8 digits of the mailbox
number are printed in the
MBX/EXTN column.
BADNAMNM
USRINCON
ONT_ERR RCV_FAIL Logged an OctelNet packet receive failure.
An attempt to receive/decode an OctelNet
packet failed. The reason for the failure is
indicated in the AUX column for
decryption failure, unscrambling failure,
checksum failure, timeout, or the remote
side hanging up. For other errors, the AUX
column is blank.
DECRPT
UNSCRM
CHKSUM
TIMOUT
HANGUP
Decryption failure
Unscrambling failure
Checksum failure
Timeout
Remote side hanging up
RECORD Startrecord message. Type of message is entered in AUX
column
REMOVED Messageremoved from mailbox or
location.
LAN RCV Received message. SUCCESS
RECEIVED Network message received.
RECRD_CALL Record call in progress.
ONT_IN,
ONT_OUT
SAVE_GO Save go (DTMF digit9). Sent by the base
serverto the node after receivingthe save
requestfrom the node.
ONT_IN,
ONT_OUT
SAVE_RQ Save request (DTMF digit 8). Request by
the node to the base server afterreceiving
an end of messagefrom the base.
LAN SEND Final message status result of STRTSND. SUCCESS
CALLFAIL Network connection was not successful or
was closed. Willretry to make connection.
SENT Messagesent.
ONT_IN,
ONT_OUT
SER_NUM Serialnumber packet sent by the node to
the base server. The serial number (in hex)
istraced in the SOURCE column.
ONT_IN,
ONT_OUT
SHDR_REQ Session header request packet sent by the
baseserver to the node. The serial number
of the base isin the SOURCE column.
ONT_IN,
ONT_OUT
SHDR_RSP Session header response packet sent by the
node to the base server. The serial number
of the node is in the SOURCE column.
ACCEPT
REJECT
The node is accepting the proposed
connection.
The node is rejecting the proposed
connection.
ONT_ERR SND_FAIL OctelNetpacket send failure.An attempt to
prepareor send an OctelNet packet failed.
The reason for the failure is indicated in
the AUX column for encryption failure,
scrambling failure, checksum failure, or
the remote side hanging up. For other
errors,the AUX column is blank.
ENCRPT
SCRMBL
CHKSUM
HANGUP
Encryption failure
Scrambling failure
Checksum failure
Remote side hanging up