INSTALL 1-15
Octel 200/300 S.4.1PB60019−01
Is (locationname) located on the same PBX as this system? (Y/N,empty line = N)
:
Enter ROUTE NAMES for up to three ROUTE CHOICES to (locationname) .
1:
2:
3:
Enter PUBLIC NETWORK NUMBER (PNN) to call (locationname) .
(May include: 0−9,*,#, D=DELAY, E=EXPECT DIAL TONE, or Cn.
1−12 chars, empty line = NONE )
:
Enter TIE NETWORK NUMBER (TNN) to call (locationname) .
(May include: 0−9,*,#, D=DELAY, E=EXPECT DIAL TONE, or Cn.
1−7 chars, empty line = NONE )
:
Is (locationname) accessible overthe DIGITAL NETWORK? (Y/N, empty line = N)
:
If the above question is answered Yfor Digital Networking, refer to the Networking volume, DigitalNetworking chapter.
6. NET NUMBERING PLAN.
Enter NUMBERING PLAN information for each NETWORK LOCATION.
Enter as:
LOCATION NAME, INITIAL DIGITS (1−8 digits), NET MAILBOX LENGTH (1−16),
NUM OF DIGITS TO STRIP(0−15)., NUM OF DIGITS TO STRIP FROM SELF(0−8)
Enter empty line when done.
7. LISTSQuestion 7 is used to create System Distribution Lists.
7. DISTRIBUTION LISTS.
Enter the LIST NUMBER. (1−16 digits).
This Number must already exist as a mailbox in the USER table.
Then enter each mailbox to be added to the list.(1−16 digits).
If the list exists, new mailboxes will be appended to existing ones.
Enter empty line when done.
Enter DISTRIBUTION LIST NUMBER.
ADD:4000
WARNING: MESSAGES IF ANY IN MAILBOX WILL BE LOST!
ARE YOU SURE (Y/N) ? (Y/N, EMPTY LINE = N):Y
NEW DISTRIBUTION LIST.
Enter each MAILBOX or RANGE to be added to this list.