Brocade Communications Systems DCX 8510-4 manual NsShow NsAllShow SwitchShow -qsfp FabricShow

5 Brocade DCX 8510-4 chassis removal and replacement

5.Display and record the manufacturer serial numbers.

Enter chassisShow; then copy the command output into the config-miscinfo.txt file.

“Factory Serial Num” and “Serial Num” are listed under “Chassis/WWN Unit 1.” If the current WWN cards are the original cards, the factory serial number listed is the same as the chassis serial number.

switch:admin> chassisshow

Chassis Backplane Revision: 1F

SW BLADE Slot: 1
Header Version:	2
Power Consume Factor:	-50
Factory Part Num:	60-0001532-03
Factory Serial Num:	KP000000195
Manufacture:	Day: 1 Month: 1 Year: 2007
Update:	Day: 14	Month:	3	Year: 2012
Time Alive:	187 days
Time Awake:	3 days
<output truncated>
CHASSIS/WWN Unit: 1	(in same assembly as WWN Unit: 2)
Header Version:	2
Power Consume Factor:	-3
Factory Part Num:	60-0001501-07
Factory Serial Num:	FT02X805BE2
Manufacture:	Day: 26	Month:	3	Year: 2007
Update:	Day: 14	Month:	3	Year: 2009
Time Alive:	207 days
Time Awake:	3 days

<output truncated>

switch:admin>

6.Create a SAN “profile” by entering and recording the information provided by the following commands:

•nsShow

•nsAllShow

•switchShow -qsfp

•fabricShow

Copy the command output into a text file named “SANbefor.txt.” After the Brocade DCX 8510-4 is restored to the fabric, this information can be used to verify that no unintentional changes have occurred to the fabric.

switch:admin> nsshow

Enter Pid COS PortName NodeName TTL <output truncated>

switch:admin> nsallshow

12Nx_Ports in the Fabric <output truncated>

switch:admin> switchshow

98	Brocade DCX 8510-4 Backbone Hardware Reference Manual
	53-1002177-05