Brocade Communications Systems DCX 8510-4 manual Verifying correct operation of the system

Brocade DCX 8510-4 chassis removal and replacement 5

4. Reboot the Brocade DCX 8510-4.

Verifying correct operation of the system

Complete the following steps to verify the correct operation of the Brocade DCX 8510-4. 1. Log in to the Brocade DCX 8510-4 as admin.

switch:admin> login login: admin password: xxxxxxxx switch:admin>

2.Enter the slotShow -mcommand and verify that all the installed cards are detected and that their status is operational (enabled).

switch:admin> slotShow -m

Slot Blade Type ID Model Name Status

--------------------------------------------------

1	SW BLADE	97	FC16-32	ENABLED
2	SW BLADE	77	FC8-64	ENABLED
3	CORE BLADE	99	CR16-4	ENABLED
4	CP BLADE	50	CP8	ENABLED
5	CP BLADE	50	CP8	ENABLED
6	CORE BLADE	99	CR16-4	ENABLED
7	SW BLADE	96	FC16-48	ENABLED
8	SW BLADE	77	FC8-64	ENABLED

switch:admin>

3.Verify that the Brocade DCX 8510-4 is functioning correctly by entering switchShow or switchStatusShow.

This switchShow command displays the Brocade DCX 8510-4 and port status information.

DCX-4_130:admin> switchshow
switchName:			DCX-4_130
switchType:			121.3
switchState:			Online
switchMode:			Native
switchRole:			Principal
switchDomain:			130
switchId:			fffc82
switchWwn:			10:00:00:05:33:03:2c:00
zoning:			ON (ZONE_CONFIG_NAME)
switchBeacon:			OFF
FC Router:			ON
FC Router BB Fabric ID: 10
Address Mode:			0
Index Slot Port			Address Media		Speed	State	Proto
=======================================================
0	1	0	820000	id	N8	Online	FC F-Port
10:00:00:05:1e:f8:a0:b4

Brocade DCX 8510-4 Backbone Hardware Reference Manual	103
53-1002177-05