Brocade Communications Systems IPMC5000PEF manual Syntax show ip pim all-vrf vrf vrf-name resource

IPv4 Multicast Protocols

Total hw w/Tag MVID entries 0

Total hw w/Tag invalid MVID entries 0

Syntax: show ip pim [all-vrf [ vrf vrf-name] ] resource

The vrf parameter allows you to display hardware resource information for the VRF instance identified by the vrf-namevariable.

The following table displays the output from the show ip pim resource command.

TABLE 2 Output from the show ip pim resource command

Field	Description
Num alloc	Number of VRF instances allocated.
System max	Maximum number of VRFs allowed in the system.
Size	Size of one instance of the resource in bytes.
alloc	Number of nodes of that data that are currently allocated in memory.
in-use	Number of allocated nodes in use.
avail	Number of allocated nodes are not in use.
get-fail	Number of allocation failures for this node.
limit	Maximum number of nodes that can be allocated for a data structure. This may or may not be
	configurable, depending on the data structure
get-mem	Number of successful allocations for this node.
size	Size of the node in bytes.
init	Number of nodes that are allocated during initialization time.

To display usage and fail-count information for SG entries on each VRF, use the show ip pim all-vrfhw-resourcecommand.

device# show ip pim all-vrf hw-resource

VRF	Usage	Fail
default-vrf	3072	8
blue	3072	0

-------------------------------

Total usage 6144

System-max limit for SG entries: 6144

Syntax: show ip pim [all-vrf [ vrf vrf-name] ] hw-resource

The vrf parameter allows you to display hardware resource information for the VRF instance identified by the vrf-namevariable.

The following table displays the output from the show ip pim all-vrfhw-resourcecommand.

104	FastIron Ethernet Switch IP Multicast Configuration Guide
	53-1003085-02