Brocade Communications Systems IPMC5000PEF manual

Displaying MSDP RPF-Peer

TABLE 16 MSDP source active cache (Continued)

This field...	Displays...

Orig Peer	The peer from which this source-active entry was received.

Age	The number of seconds the entry has been in the cache

You can use the following command to filter the output to display only the entries matching a specific source.

device#show ip msdp sa-cache 1.1.1.1

You can use the following command to filter the output to display only the entries matching a specific group.

device#show ip msdp sa-cache 239.1.1.1

You can use the following command to filter the output to display only the SA cache entries that are

received from peers in the BGP AS Number 100.

device#show ip msdp sa-cache 100

You can use the following command to filter the output to display only the SA cache entries that are

originated by the RP 1.1.1.1.

device#show ip msdp sa-cache orig-rp 1.1.1.1

You can use the following command to filter the output to display only the SA cache entries that are

received from the peer 1.1.1.1.

device#show ip msdp sa-cache peer 1.1.1.1

You can use the following command to display the rejected SAs. You can further narrow down by quoting the reason for rejection.

device#show ip msdp sa-cache rejected

You can use the following command to display the self-originated SAs.

device#show ip msdp sa-cache self-originated

To display MSDP peer information for the RP 1.1.1.1, enter the following command.

device# show ip msdp rpf-peer 1.1.1.1 MSDP Peer Status Summary

KA: Keepalive SA:Source-Active NOT: Notification Peer Address Peer As State KA SA NOT Age

In Out In Out In Out

40.40.40.31001 ESTABLISH 62 62 0 0 0 0 7

Brocade#

FastIron Ethernet Switch IP Multicast Configuration Guide	133
53-1003085-02