Displaying candidate RP information
TABLE 6 Output from the show ip pim bsr command (Continued)
This field... | Displays... |
|
|
|
|
RP | Indicates the IP address of the Rendezvous Point (RP). |
|
|
|
|
| NOTE |
|
| This field appears only if this device is a candidate BSR. |
|
|
|
|
group prefixes | Indicates the multicast groups for which the RP listed by the previous field is a |
|
| candidate RP. |
|
|
|
|
| NOTE |
|
| This field appears only if this device is a candidate BSR. |
|
|
|
|
Indicates how frequently the BSR sends candidate RP advertisement messages. |
| |
advertisement period |
|
|
|
|
|
| NOTE |
|
| This field appears only if this device is a candidate BSR. |
|
|
|
|
Displaying candidate RP information
To display candidate RP information, enter the following command at any CLI level.
device# show ip pim
Next
group prefixes: 224.0.0.0 / 4
This example show information displayed on a device that is a candidate RP. The next example shows the message displayed on a device that is not a candidate RP.
device# show ip pim
This system is not a Candidate-RP.
Syntax: show ip pim [vrf vrf-name ] rp-candidate
This command displays candidate RP information for the VRF instance identified by the
The following table describes the output from this command.
110 | FastIron Ethernet Switch IP Multicast Configuration Guide |
|
