route-precedence admin-distance
Examples
History
You must configure four parameters indicating the four different route types. If you want to specify that a particular route type not be used, configure the none keyword to fill the precedence table.
This command specifies a
Device(config)# router pim
This command specifies that the unicast default route be ignored.
Device(config)# router pim
Release version | Command history |
|
|
8.0.10a | This command was introduced. |
|
|
route-precedence admin-distance
| Specifies that multicast routes are selected from the best route from the multicast routing table |
| (mRTM) and the unicast routing (uRTM) table. |
Syntax | |
| no |
Command Default | The default is |
Modes | PIM configuration mode |
Usage Guidelines | The no form of this command removes the configuration and restores the default route precedence |
| settings. |
| If both the mRTM and the uRTM have routes of equal cost, the route from the mRTM is preferred. |
Examples | The following example shows how to specify that the best multicast route from the mRTM and uRTM |
| tables is selected. |
|
History | Release version | Command history |
| ||
|
|
|
| 8.0.10a | This command was introduced. |
|
|
|
show ip mroute
Displays information on multicast routes. You can specify whether you want to display information from static or connected mroutes or from a particular mroute.
Syntax show ip mroute [vrf
Parameters vrf vrf-name
220 | FastIron Ethernet Switch IP Multicast Configuration Guide |
|
