Brocade Communications Systems IPMC5000PEF manual Displaying PIM traffic statistics

Displaying PIM traffic statistics

System-max limit for SG entries: 6144

Syntax: show ipv6 pim [ all-vrf [ vrf vrf-name] ] hw-resource

The vrf parameter allows you to display hardware resource information for the VRF instance identified by the vrf-namevariable.

The following table displays the output from the show ipv6 pim all-vrfhw-resourcecommand.

TABLE 38 Output from the show ipv6 pim all-vrf hw-resource command

Field	Description
VRF	Name of the VRF.
Usage	Number of allocated SG entries in this VRF.
Fail	Number of failures while allocating SG entries in this VRF (due to system-max
	limit).
Total usage	Total number of SG entries in the system (All-VRFs).
System-max limit for SG entries	Configured system limit using the pim6-hw-mcache command.

Displaying PIM traffic statistics

To display IPv6 PIM traffic statistics, enter the show ipv6 pim traffic command at any CLI level.

device#	show ipv6	pim traffic	ASSERT	REGISTER	REGISTER		BOOTSTRAP CAND. RP		Err
Port	HELLO	JOIN-PRUNE
	+---------	+-----------	GRAFT(DM) STOP(SM)			MSGS (SM) ADV.---------(SM)			+---
-------			+---------	+---------	+---------		+---------	+
------+	Rx---------	Rx	Rx	Rx	Rx	+	Rx	Rx	Rx
	+	-----------+	---------+	---------0	+---------		---------+	---------0	+---
v170	0	0	0		0		0		0
v501	0	0	0	0	0		0	0	0
v503	3302	2524	0	0	0		0	0	0
Port	HELLO	JOIN-PRUNE	ASSERT	REGISTER	REGISTER		BOOTSTRAP CAND. RP		Err
	+---------	+-----------	GRAFT(DM) STOP(SM)			MSGS (SM) ADV.---------(SM)			+---
-------			+---------	+---------	+---------		+---------	+
------+	Tx---------	Tx	Tx	Tx	Tx	+	Tx	Tx	+---
	+	-----------+	---------+	---------0	+---------		---------+	---------0
v170	3576	0	0		0		0
v501	1456	0	0	0	0		0	0
v503	1456	1314	0	0	0		2	0

Syntax: show ipv6 pim [ vrf vrf-name] traffic

The vrf parameter allows you to display IPv6 traffic statistics for the VRF instance identified by the vrf- name variable.

The following table displays the output from the show ipv6 pim traffic command.

TABLE 39 Output from the show ipv6 pim traffic command

Field	Description
Port	The port or virtual interface on which the IPv6 PIM interface is configured.
Hello	The number of IPv6 PIM Hello messages sent or received on the interface.

190	FastIron Ethernet Switch IP Multicast Configuration Guide
	53-1003085-02