Clear commands for IGMP snooping

default V2

****Warning! has V3 (age=0) nbrs group: 234.4.4.4, life = 260 group: 226.6.6.6, life = 260

3/1/1 has 4 groups,

This interface is non-Querier (passive) default V2

group: 238.8.8.8, life = 260

group: 228.8.8.8, life = 260

group: 230.0.0.0, life = 260

group: 224.4.4.4, life = 260

3/1/4

has

1 groups,

This interface is non-Querier (passive) Querier is 10.8.8.8

Age is 0

Max response time is 100 default V2

****Warning! has V3 (age=0) nbrs group: 236.6.6.6, life = 260

Clear commands for IGMP snooping

The clear IGMP snooping commands must be used only in troubleshooting conditions, or to recover from errors.

Clearing the IGMP mcache

To clear the mcache on all VLANs, enter the clear ip multicast mcache command.

device#clear ip multicast mcache

Syntax: clear ip multicast mcache

Clearing the mcache on a specific VLAN

To clear the mcache on a specific VLAN, enter the following command.

device#clear ip multicast vlan 10 mcache

Syntax: clear ip multicast vlan vlan-idmcache

The vlan-idparameter specifies the specific VLAN in which the mcache needs to be cleared.

Clearing traffic on a specific VLAN

To clear the traffic counters on a specific VLAN, enter the following command.

device#clear ip multicast vlan 10 traffic

Syntax: clear ip multicast vlanvlan-idtraffic

The vlan-idparameter specifies the specific VLAN in which traffic counters needs to be cleared.

34

FastIron Ethernet Switch IP Multicast Configuration Guide

 

53-1003085-02

Page 36
Image 36
Brocade Communications Systems IPMC5000PEF manual Clear commands for Igmp snooping, Clearing the Igmp mcache