Brocade Communications Systems IPMC5000PEF manual Ip mroute next-hop-enable-default

ip mroute next-hop-enable-default

Configures a metric for comparing the route to other static routes in the static route table that have the same destination. The range is 1-16; the default is 1.

distance distance-value

Configures the route's administrative distance. The range is 1-255; the default is 1.

name name

Name for this static route.

Modes	VRF configuration mode
Usage Guidelines	The no form of this command deletes a previously configured next-hop static multicast route.
Examples	This example adds a route to network 10.1.1.0/24 with next hop 10.2.1.1.
	Device(config-vrf)# ip mroute 10.1.1.0 255.255.255.0 10.2.1.1

History	Release version	Command history
	8.0.10a	This command was introduced.

ip mroute next-hop-enable-default

	Enables the option to use the default mroute to resolve a static mroute next hop.
Syntax	ip mroute [ vrf vrf-name] next-hop-enable-default
	no ip mroute [ vrf vrf-name] next-hop-enable-default
Command Default	Static mroutes are not resolved using the default mroute.
Parameters	vrf vrf-name
	Configures a static mroute for this virtual routing and forwarding (VRF) route.
Modes	VRF configuration mode
Usage Guidelines	The no form of this command disables the default mroute option for next hops.
Examples	This example enables the use of the default mroute to resolve a static mroute next hop:
	Device(config-vrf)# ip mroute next-hop-enable-default

History	Release version	Command history
	8.0.10a	This command was introduced.

FastIron Ethernet Switch IP Multicast Configuration Guide	213
53-1003085-02