IPv4 Multicast Protocols

Enter ve and its number , or ethernet and its port-addressto display information for a specific virtual routing interface, or ethernet interface.

The tunnelnum parameter specifies a GRE tunnel interface that is being configured. The GRE tunnel interface is enabled under the router PIM configuration.

Entering an address for group-addressdisplays information for a specified group on the specified interface.

The report shows the following information:

TABLE 23 Output of show ip igmp interface

This field

Displays

 

 

Intf

The virtual interface on which IGMP is enabled.

 

 

Port

The physical port on which IGMP is enabled.

 

 

Groups

The number of groups that this interface or port has membership.

 

 

Version

 

 

 

Oper

The IGMP version that is operating on the interface.

 

 

Cfg

The IGMP version that is configured for this interface.

 

 

Querier

Where the Querier resides:

 

The IP address of the router where the querier is located

 

or

 

Self - if the querier is on the same router as the intf or port.

 

 

Max response

 

 

 

oQrr

Other Querier present timer.

 

 

GenQ

General Query timer

 

 

V1Rtr

Whether IGMPv1 is present on the intf or port.

 

 

V2Rtr

Whether IGMPv2 is present on the intf or port.

 

 

Tracking

Fast tracking status:

 

Enabled

 

or

 

Disabled

 

 

FastIron Ethernet Switch IP Multicast Configuration Guide

155

53-1003085-02

 

Page 157
Image 157
Brocade Communications Systems IPMC5000PEF manual IPv4 Multicast Protocols