Displaying MLD snooping information by VLAN
Field | Description |
|
|
MbrV2 | The MLDv2 membership report. |
|
|
IsIN | Number of source addresses that were included in the traffic. |
|
|
IsEX | Number of source addresses that were excluded in the traffic. |
|
|
ToIN | Number of times the interface mode changed from EXCLUDE to INCLUDE. |
|
|
ToEX | Number of times the interface mode changed from INCLUDE to EXCLUDE. |
|
|
ALLO | Number of times additional source addresses were allowed on the interface. |
|
|
BLK | Number of times sources were removed from an interface. |
|
|
Number of packets having errors such as checksum errors. | |
|
|
Displaying MLD snooping information by VLAN
You can display MLD snooping information for all VLANs or for a specific VLAN. For example, to display MLD snooping information for VLAN 70, enter the show ipv6 multicast vlan command.
device#show ipv6 multicast vlan 70
version=1,
router ports: 1/36(120) 2001:DB8::2e0:52ff:fe00:9900, 1/26 has 2 grp,
1/26 has 2 grp,
1/35 has 0 grp,
Syntax: show ipv6 multicast vlan [vlan-id]
If you do not specify the
The following table describes information displayed by the show ipv6 multicast vlan command.
Field Description
version | The MLD version number. |
Indicates that the port is a | |
|
|
60 | FastIron Ethernet Switch IP Multicast Configuration Guide |
|