Displaying PIM6 SM snooping for a VLAN
1/1/2 has 1 src: 15::11(0),
2/1/3 has 1 src: 15::11(0),
2(0:16 1:3) has 2 pim join ports out of 2 OIF 2/1/3 (age=0), 1/1/2 (age=0),
1/1/2 has 1 src: 15::16(0),
This output shows the number of PIM join OIF out of the total OIF. The join or prune messages are
Displaying PIM6 SM snooping for a VLAN
You can display PIM6 SM snooping information for all groups by entering the following command at any level of the CLI on a Layer 2 Switch.
device#show ipv6 multicast
1(0:11 1:3) has 2 pim join ports out of 2 OIF
1/1/2 (age=30), 2/1/3 (age=30), 1/1/2 has 1 src: 15::11(30), 2/1/3 has 1 src: 15::11(30),
2(0:16 1:3) has 2 pim join ports out of 2 OIF 2/1/3 (age=90), 1/1/2 (age=10),
1/1/2 has 1 src: 15::16(10),
Syntax: show ipv6 multicast pimsm-snooping vlan vlan-id
Enter the ID of the VLAN for the
The following table describes the information displayed by the show ipv6 multicast
Field | Description |
|
|
VLAN ID | The |
| members in the VLAN. |
PIM6 SM Neighbor list
The PIM6 SM routers that are attached to the Layer 2 Switch ports.
The value following "expires" indicates how many seconds the Layer 2 Switch will wait for a hello message from the neighbor before determining that the neighbor is no longer present and removing the neighbor from the list.
Multicast Group | The IP address of the multicast group. |
|
|
|
|
| NOTE |
|
| The fid and camindex values are used by Brocade Technical Support for troubleshooting. |
|
|
|
|
Forwarding Port | The ports attached to the group receivers. A port is listed here when it receives a join |
|
| message for the group, an MLD membership report for the group, or both. |
|
|
|
|
PIMv2 Group Port | The ports on which the Layer 2 Switch has received PIM6 SM join messages for the group. |
|
|
|
|
Source, Port list | The IP address of each PIM6 SM source and the Layer 2 Switch ports connected to the |
|
| receivers of the source. |
|
|
|
|
FastIron Ethernet Switch IP Multicast Configuration Guide | 67 |
|