Brocade Communications Systems IPMC5000PEF manual Ipv6 mroute next-hop-enable-default

ipv6 mroute next-hop-enable-default

Configures a static mroute for this virtual routing and forwarding (VRF) route.

ipv6-address-prefix/prefix-length

Configures the destination IPv6 address and prefix for which the route should be added.

next-hop address

Configures a next-hop address as the route path.

cost

Configures a metric for comparing the route to other static routes in the static route table that have the same destination. The range is 1-16; the default is 1.

distance distance-value

Configures the route's administrative distance. The range is 1 to 255; the default is 1.

name name

Name for this static route.

Modes	VRF configuration mode
Usage Guidelines	The no form of this command deletes a previously configured next-hop static mroute.
Examples	This example adds a route to network 2020::0/120 with 2022::0/120 as the next hop.
	Device(config-vrf)# ipv6 mroute 2020::0/120 2022::0/120

History	Release version	Command history
	8.0.10a	This command was introduced.

ipv6 mroute next-hop-enable-default

	Enables the option to use the default mroute to resolve a static mroute next hop.
Syntax	ipv6 mroute [ vrf vrf-name] next-hop-enable-default
	no ipv6 mroute [ vrf vrf-name] next-hop-enable-default
Command Default	Static mroutes are not resolved using the default mroute.
Parameters	vrf vrf-name
	Configures a static mroute for this virtual routing and forwarding (VRF) route.
Modes	VRF configuration mode
Usage Guidelines	The no form of this command disables the default mroute option for next hops.
Examples	This example enables the use of the default mroute to resolve a static mroute next hop:
	Device(config-vrf)# ipv6 mroute next-hop-enable-default

FastIron Ethernet Switch IP Multicast Configuration Guide	217
53-1003085-02