Brocade Communications Systems IPMC5000PEF manual Ip max-mroute, Ip mroute, Ethernet

ip max-mroute

ip max-mroute

	Configures a limit to the number of multicast routes supported.
Syntax	ip max-mroute num
	no ip max-mroute
Command Default	The default is no limit.
Parameters	num
	Configures the maximum number of multicast routes supported.
Modes	VRF configuration mode
Usage Guidelines	The no form of this command restores the limit to the default value.
Examples	This example limits the number of multicast routes supported on the VRF named my_vrf to 20.
	Device(config)# vrf my_vrf
	Device(config)# address-family ipv4
	Device(config-vrf)# ip max-mroute 20
History
	Release version	Command history
	8.0.10a	This command was introduced.

ip mroute

	Adds a directly connected static multicast route.
Syntax	ip mroute [ vrf vrf-name ] ip-address ip-address mask { ethernet ve tunnel num } [cost ] [ distance
	distance-value ] [ name name ]
	no ip mroute [ vrf vrf-name ] ip-address ip-address mask { ethernet ve tunnel num } [cost ] [
	distance distance-value ] [ name name ]
Command Default	No directly connected static multicast route is configured.
Parameters	vrf vrf-name

Configures a static mroute for this virtual routing and forwarding (VRF) route.

ip-address ip-address mask

Configures the destination IP address and prefix for which the route should be added.

ethernet

Configures an Ethernet interface as the route path.

ve

FastIron Ethernet Switch IP Multicast Configuration Guide	211
53-1003085-02