Brocade Communications Systems IPMC5000PEF manual Displaying Source Active cache information

IPv4 Multicast Protocols

TABLE 15 MSDP peer information (Continued)

This field...	Displays...
TotalRcv	The number of sequence numbers received from the neighbor.
RcvQue	The number of sequence numbers in the receive queue.
SendQue	The number of sequence numbers in the send queue.

Displaying Source Active cache information

To display the Source Actives in the MSDP cache, use the following command.

device # show ip msdp vrf blue sa-cacheTotal of 10 SA cache entriesIndex RP address (Source, Group) Orig Peer Age1 2.2.2.2 (192.6.1.10, 227.1.1.1)

192.1.1.20 2 2.2.2.2 (192.6.1.10, 227.1.1.2) 192.1.1.2 0 3 2.2.2.2 (192.6.1.10, 227.1.1.3) 192.1.1.2 0 4 2.2.2.2 (192.6.1.10, 227.1.1.4)

192.1.1.20 5 2.2.2.2 (192.6.1.10, 227.1.1.5) 192.1.1.2 0 6 2.2.2.2 (192.6.1.10, 227.1.1.6) 192.1.1.2 0 7 2.2.2.2 (192.6.1.10, 227.1.1.7)

192.1.1.20 8 2.2.2.2 (192.6.1.10, 227.1.1.8) 192.1.1.2 0 9 2.2.2.2 (192.6.1.10, 227.1.1.9) 192.1.1.2 0 10 2.2.2.2 (192.6.1.10, 227.1.1.10)

192.1.1.20

Syntax: show ip msdp [ vrf vrf-name] sa-cache [source-addressgroup-addresspeer-as as- number counts orig-rp rp-address peer peer-address ] [ rejected self-originated ] ]

The source-addressparameter selects the source address of the SA entry.

The group-addressparameter selects the group address of the SA entry.

The peer-askeyword specifies the BGP AS Number of the forwarding peer.

The counts keyword displays only the count of entries.

The orig-rpkeyword specifies the originating RP address.

The peer keyword specifies the peer address.

The rejected keyword displays the rejected SAs.

The self-originatedkeyword displays the self-originated SAs.

The following table describes the output from this command.

TABLE 16 MSDP source active cache

This field...	Displays...
Total	The number of entries the cache currently contains.
Index	The cache entry number.
RP	The RP through which receivers can access the group traffic from the source
SourceAddr	The IP address of the multicast source.
GroupAddr	The IP multicast group to which the source is sending information.

132	FastIron Ethernet Switch IP Multicast Configuration Guide
	53-1003085-02