Displaying MLD traffic
TABLE 44 Output from the show ipv6 mld vrf cs static command
Field | Description |
|
|
Group Address | The address of the multicast group. |
|
|
Interface Port List | The physical ports on which the multicast groups are received. |
|
|
Displaying MLD traffic
To display information on MLD traffic, enter a command such as the following.
device# show ipv6 | mld traffic |
|
|
|
|
|
|
|
| BLK | |||
Recv | QryV1 QryV2 | GSQry MbrV1 MbrV2 Leave IS_IN IS_EX ToIN ToEX ALLO | |||||||||||
e3/1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
e3/2 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
e6/18 | 0 | 0 | 0 | 0 | 0 | 176 | 0 | 110 | 0 | 0 | 0 | 66 | 0 |
e6/19 | 0 | 0 | 0 | 0 | 0 | 176 | 0 | 110 | 0 | 0 | 0 | 66 | 0 |
e6/20 | 0 | 0 | 0 | 0 | 0 | 176 | 0 | 110 | 0 | 0 | 0 | 66 | 0 |
e6/25 | 0 | 0 | 0 | 0 | 0 | 176 | 0 | 110 | 0 | 0 | 0 | 66 | 0 |
l1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Send | QryV1 QryV2 | GSQry |
|
|
|
|
|
|
|
|
| ||
e3/1 | 0 | 0 | 0 | 0 |
|
|
|
|
|
|
|
|
|
e3/2 | 0 | 0 | 0 | 0 |
|
|
|
|
|
|
|
|
|
e6/18 | 0 | 10 | 10 | 0 |
|
|
|
|
|
|
|
|
|
e6/19 | 0 | 10 | 10 | 0 |
|
|
|
|
|
|
|
|
|
e6/20 | 0 | 10 | 10 | 0 |
|
|
|
|
|
|
|
|
|
e6/25 | 0 | 10 | 10 | 0 |
|
|
|
|
|
|
|
|
|
l1 | 0 | 0 | 0 | 0 |
|
|
|
|
|
|
|
|
|
R2# |
|
|
|
|
|
|
|
|
|
|
|
|
|
The report has a Receive and a Send section.
Syntax: show ipv6 mld [ vrf vrf-name ] traffic
The vrf parameter specifies that you want to display information on MLD traffic for the VRF specified by the
The following table displays the output from the show ipv6 mld traffic command.
TABLE 45 Output from the show ipv6 mld traffic command
Field | Description |
|
|
QryV1 | Number of general MLDv1 queries received or sent by the virtual routing interface. |
|
|
QryV2 | Number of general MLDv2 queries received or sent by the virtual routing interface. |
|
|
Number of | |
|
|
GSQry | Number of source specific queries received or sent by the virtual routing interface. |
|
|
MbrV1 | Number of MLDv1 membership reports received. |
|
|
MbrV2 | Number of MLDv2 membership reports received. |
|
|
Leave | Number of MLDv1 "leave" messages on the interface. (See 2_Ex for MLDv2.) |
|
|
Is_IN | Number of source addresses that were included in the traffic. |
|
|
FastIron Ethernet Switch IP Multicast Configuration Guide | 205 |
|
