
Displaying PIM Sparse configuration information and statistics
TABLE 3 Output from the show ip pim all-vrf hw-resource command
Field | Description |
|
|
VRF | Name of the VRF. |
|
|
Usage | Number of allocated SG entries in this VRF. |
|
|
Fail | Number of failures while allocating SG entries in this VRF (due to the |
| limit. |
|
|
Total usage | Total number of SG entries in the system (all VRFs). |
|
|
Configured system limit for | |
|
|
Displaying PIM Sparse configuration information and statistics
You can display the following PIM Sparse information:
•Basic PIM Sparse configuration information
•Group information
•BSR information
•Candidate RP information
•
•RP information for a PIM Sparse group
•RP set list
•PIM neighbor information
•The PIM flow cache
•The PIM multicast cache
•PIM traffic statistics
•PIM counter statistics
Displaying basic PIM Sparse configuration information
To display PIM Sparse configuration information, enter the following command at any CLI level.
Device(config)# show ip pim sparse |
|
| |||
Global PIM | Sparse Mode Settings | Current Count | : 2 | ||
Maximum Mcache | : | 12992 | |||
Hello interval | : | 30 | Neighbor timeout | : 105 | |
Join/Prune interval | : | 60 | Inactivity interval | : 180 | |
Hardware | Drop Enabled | : | Yes | Prune Wait Interval | : 3 |
Bootstrap Msg interval : | 60 | : 60 | |||
Register | Suppress Time : | 60 | Register Probe Time | : 10 | |
Register | Stop Delay | : | 10 | Register Suppress interval | : 60 |
SSM Enabled | : Yes | SPT Threshold | : 1 | ||
SSM Group | Range | : 232.0.0.0/8 |
|
| |
Route Precedence | : |
Syntax: show ip pim [vrf vrf-name ] sparse
FastIron Ethernet Switch IP Multicast Configuration Guide | 105 |
|