Displaying static MLD groups
Max Response Time | : | 10s |
|
|
Group Membership Time | : | 260s | Configured Version | : 0 |
Operating Version | : | 2 | ||
Robustness Variable | : | 2 | Last Member Query Count: 2 | |
Last Member Query Interval: | 1s | |||
Older Host Present Timer | : | 260s |
|
|
Syntax: show ipv6 mld [ vrf vrf-name ] settings
The vrf parameter specifies that you want to display information for MLD settings for the VRF specified by the
The following table displays the output from the show ipv6 mld vrf eng settings command.
TABLE 43 Output from the show ipv6 mld vrf eng settings command
Field | Description |
|
|
Query Interval | How often the router will query an interface for group membership. |
|
|
Configured Interval | The interval that has been configured for the router. |
|
|
Max Response Time | The length of time in seconds that the router will wait for an IGMP (V1 or V2) |
| response from an interface before concluding that the group member on that |
| interface is down and removing it from the group. |
|
|
Group Membership Time | The length of time in seconds that a group will remain active on an interface in the |
| absence of a group report. |
|
|
Operating Version | The IGMP version operating on the router. |
|
|
Configured Version | The IGMP version configured on the router. |
|
|
Robustness Variable | Used to |
| the group interval. |
Last Member Query Interval Indicates when a leave is received; a
Last Member Query Count Specifies the number of
Displaying static MLD groups
The following command displays static MLD groups for the "cs" VRF.
device# show ipv6 mld vrf cs static | Interface Port List | |
Group Address | ||
ff1e:1::1 | ethe 2/10 | |
ff1e:a::7f | v3 | ethe 2/10 |
Syntax: show ipv6 mld [ vrf vrf-name ] static
The vrf parameter specifies that you want to display static MLD group information for the VRF specified by the
The following table displays the output from the show ipv6 mld vrf cs static command.
204 | FastIron Ethernet Switch IP Multicast Configuration Guide |
|
