Brocade Communications Systems IPMC5000PEF Show ip multicast optimization, Show ip static mroute

show ip multicast optimization

show ip multicast optimization

Syntax

Parameters

Modes Usage Guidelines

Examples

History

Displays Internet Group Management Protocol (IGMP) snooping hardware resource-sharing information. You can configure it to display the availability of IP multicast (IPMC) group indexes in the hardware and how it is been used and shared.

show ip multicast optimization [ ipmc ]

ipmc

Specifies the IPMC group index.

Privileged EXEC mode

NOTE

The show ip multicast optimization command is available only on ICX 7750 devices.

This example displays resource information showing that IPMC group index 4 is shared by two users and the ports included in the set are 1/1/6 and 1/1/1:

Device(config-vlan-150)#show ip multicast optimization					0
Total IPMCs Allocated:		0; Available: 8192; Failed:
Index	IPMC	SetId	Users	Set
1.	4	0x161fcbd8	2	{<1/1/6>,<1/1/1>,}
2.	1	0x161d0930	10	{<1/1/6>,<1/1/4>,<1/1/3>,<1/1/2>,
Sharability Coefficient: 76%				<1/1/1>,}
Release version		Command history
8.0.10		This command was introduced.

show ip static mroute

	Displays information for configured multicast routes.
Syntax	show ip static mroute [ vrf vrf-name] ip-subnet mask
Parameters	vrf vrf-name
	Specifies a VRF route.
	ip-subnet [ mask ]
	Specifies an IP address.
Modes	Privileged EXEC mode
Usage Guidelines	Only resolved and best static mroutes are added to the mRTM table. These routes are prefixed with an
	asterisk in the output from the show ip static mroute command.

222	FastIron Ethernet Switch IP Multicast Configuration Guide
	53-1003085-02