Canon BJ-30 manual Temp = C\Windows, Dir C\Windows, Set Temp = C\Dos, Problem, Cause, Solution

Problem Cause Solution

Print Manager problems	The drive that contains
occur	the TEMP directory
	may not have enough
	available space.

Canon recommends that the drive have from 5 MB to 10 MB available.

To verify a proper TEMP statement, follow these steps:

1.Exit Windows and go to the MS-DOS prompt.

2.Type SET at the MS-DOS prompt. A list of statements should appear; look for the statement that says

TEMP = C:\WINDOWS.

3.If the statement exists, verify that the directory exists by typing in the drive and directory location with the DIR command. For example:

DIR C:\WINDOWS

4.If the FILE NOT FOUND message appears, then one of the following has occurred:

❏You may have typed the path incorrectly; make sure the path is correct.

❏The directory does not exist; edit the AUTOEXEC.BAT file and change the directory to a valid directory; for example:

SET TEMP = C:\DOS

Troubleshooting

Chapter 7 Troubleshooting 115