Canon BJ-30 manual Installing and Using the Battery Pack

Chapter 9 Installing and Using the Battery Pack

This chapter describes how to install and use the battery pack that comes with the Canon Portable Kit NK-300. You can purchase the Portable Kit as an option for your BJ-30 Bubble Jet Printer. You can also purchase additional battery packs (NiMH Battery Pack NB-300) to use with the Portable Kit.

The Portable Kit, which allows you to operate the printer where AC power is not available, includes the following:

Installing/Using the Battery Pack

NiMH BATTERY PACK NB-300 BATTERY CASE

Follow these guidelines to avoid damage to your printer or battery pack, and harm to you or others:

❏Before using a new battery pack, charge it as described later in this chapter.

❏Use only the Canon NB-300 rechargeable battery pack with the BJ-30.

❏Do not attempt to disassemble a battery pack or the battery case.

❏Follow local regulations when disposing of a used battery pack.

❏Do not dispose of a battery pack where it may come in contact with fire.

❏Keep foreign objects out of the battery compartment.

❏Do not allow metal objects to touch the power connector on the battery case or the terminals on the battery pack.

❏Make sure the paper support is closed when you are not using the printer. This turns off the battery switch.

❏Recharge the battery pack only when it is fully discharged. Charging it before it is fully discharged reduces the battery capacity.

❏Remove the battery pack when you are storing the printer.

Chapter 9 Installing and Using the Battery Pack 131