Canon BJ-30 manual Operational Problems, Cause, Solution

Problem	Cause	Solution
Blinking F and other	Other service call	If you see a message
number	errors	consisting of the letter F in
		combination with a number
		(such as F1 or F2) and the
		printer beeps for about five
		seconds, turn the printer off
		and reconnect your AC
		adapter. If this does not
		cause the printer to stop
		beeping, make a note of the
		message number and call
		your local Canon authorized
		dealer.

Operational Problems

If you are having problems with the printer, check the problems and solutions listed in the following table.

Problem	Cause	Solution
No power reaching	The printer may not be	Hold down the POWER
printer	turned on.	printer button until the
		printer beeps.

The printer may not be securely plugged into the AC adapter.

Make sure the AC adapter is plugged securely into the printer and into a wall outlet.

If the AC adapter is connected to a power strip, make sure the power strip is connected to an outlet and turned on.

The AC outlet may not be	Check the AC outlet.
supplying power.

Troubleshooting

Chapter 7 Troubleshooting 97