Canon BJ-30 BJ Mode, Description, FUNCTION 1 Horizontal print position, FUNCTION 2 Page length

BJ Mode

When the printer is in BJ mode, you use the FUNCTION settings to control the printer:

Function	Description	OFF	ON
1	Horizontal print	Letter size or	A4 size
	position	envelope
2	Page length	11 inches	12 inches
3	Text scale mode	Disabled	Enabled
4-5	Top margin	See following descriptions
6	Smoothing mode	360 dpi	720 dpi
7	Automatic power	Disabled	Enabled
	off mode
8	Font typeface	Disabled	Enabled
	lock mode
9	Input/download	35 KB/0 KB	3 KB/32 KB
	buffer
10	Automatic line	Carriage return	CR with LF
	feed (LF)	(CR) only
11	Automatic carriage	Line feed	LF with CR
	return (CR)	(LF) only
12	Alternate Graphics	Disabled	Enabled
	Mode (AGM)
13	Not used
14	Character set	Set 1	Set 2
15-18	Code page	See following descriptions
19	Automatic	Disabled	Enabled
	emulation switching
	mode
1A	Low ink warning	Disabled	Enabled

FUNCTION 1: Horizontal print position

Use this FUNCTION setting to change the horizontal print position according to the size of your paper. If you are using letter-size paper or envelopes, set this FUNCTION to OFF; the left margin will be 0.25 inch (6.4 mm). If you are using A4-size paper, set this FUNCTION to ON; the left margin will be 0.13 inch (3.4 mm).

FUNCTION 2: Page length

If you are using letter-size paper, set this FUNCTION to OFF; this sets the page length to 11 inches. If you are using A4-size paper, set this FUNCTION to ON; this sets the page length to 12 inches.

124 Customizing the Printer Chapter 8