Canon BJ-30 manual Attaching the AC Adapter, Plug the AC adapter into an AC outlet

Attaching the AC Adapter

C❏ Use the AC adapter that is appropriate for the voltage and frequency of your power supply: AC 120 V, 60 Hz, 0.5 A. This is standard for an electrical outlet in the United States or Canada.

❏Use only the AC adapter that came with the printer. Use of any other adapter may damage the printer.

❏If you smell a peculiar odor or see smoke, unplug the AC adapter immediately.

❏Do not place anything in front of your wall outlet that may obstruct your access to it or put pressure on the AC adapter.

❏When unplugging the AC adapter, always remove it by holding onto the adapter unit and not the cord.

❏Use the AC adapter indoors only.

❏Always plug the AC adapter into the printer before you plug it into an electrical outlet.

❏Always unplug the AC adapter from the electrical outlet before disconnecting it from the printer.

To attach the AC adapter, follow the steps below.

1.Attach the connector end of the AC adapter into the AC power receptacle on the back of the printer.

2.Plug the AC adapter into an AC outlet.

12 Setting Up the Printer Chapter 2