Cisco Systems UBR-3X10 manual Specifications and Component Part Numbers, Physical Specifications

A P P E N D I X A

Specifications and Component Part Numbers

This appendix provides information on physical and RF specifications for the

Cisco uBR 3x10 RF Switch.

Physical Specifications

The following table lists the physical specifications and power requirements for the

Cisco uBR 3x10 RF Switch.

Table A-1		Physical Specifications
	Description		Specification
	Dimensions (H x W x D)		19 x 15.5 x 5.25 in. (842 x 384 x 132 mm)
	Weight		36 lb (16.6 kg)
	AC-input voltage rating		100 to 240 VAC (Operating Range: 90 to 254 VAC)
	AC-input current rating		0.5 A
	AC-input cable		18 AWG three-wire cable, with a three-lead IEC-320 receptacle on the power supply end
			and a country-dependent plug on the power source end
	AC frequency		50-60 Hz
	DC-input voltage rating		-48 to -60 VDC (Operating Range: -40.5 to -72 VDC)
	DC-input current rating		0.7A
	DC-input cable		14 AWG (2.5 mm2) minimum recommended
	DC voltage supplied		+12V
	Temperature		Operational temperature range:32 to 104°F (0 to +40°C)
			Operating temperature range:23 to 151°F (-5 to +55°C)
	Software requirement		Cisco IOS Release 12.2(8)BC2 or later version of Cisco IOS Release 12.2BC
	Regulatory compliance		Safety: CSA950/UL1950, EN60950, IEC 60950, ACAN TS001, AS/NZS3260
			EMC Emissions: CFR 47 part 15:2000 Class B; EN55022:1998 Class B; EN300386:2000;
			AS/NZS 3548:1995 Class B; CISPR22:1997 Class B; VCCI-3/2000.04; ICES-003:1994;
			CNS13438:1997 Class B
			EMC Immunity: EN61000-3-2:1995; EN61000-3-3:1995; EN55024:1998;
			EN50082-1:1992; EN50082-1:1997
			Cisco uBR-3x10 RF Switch Hardware Installation and Cabling Guide
	OL-1984-06			A-1